• Next-Gen compound.
• Cuts FAST!
• Saves time.
• Zero fillers.
• Low dusting.
• Removes p1200 grit and up.
• Body shop safe.
• Compatible with both dual action and rotary machine.
• Compatible with a variety of foam, microfiber, and wool pads

Specifications:

1. Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product.
2. Spread product across section.
3. Raise speed to HIGH speed with LOW pressure .
4. Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass.
5. Increase pressure with each pass, finishing down with heavier pressure .
6. When scratches are gone or polish has been worked through, wipe clean with microfiber towel.
7. Clean pad.
8. Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.